Just though this would be helpfull, i was talking about it earler today


Parts
1.) 2R3Z-6C693-?? 2each bracket clamps
2.) 2R3Z-9H308C --?? Lower manifold to intercooler water adapter
3.) 2R3Z-6F089-?? EGR Valve
4.) 2R3Z- -?? EGR Tube to exhaust manifold
5.) 2R3Z- 8N500-?? Water pump intercooler bracket
6.) 2R3Z-6312-BAA Crank pulley /Harmonic Balancer
7.) 2R3Z-6C254-BC Supercharger Crank drive pulley
8.) 2R3Z-8678-BA Pulley w/mount Replaces stk alt. Pulley
9.) 2R3Z-8B603-BB Pulley bridge assembly for S.C.
10.) 1L2Z-8678-AB Idler pulley,timing cover LH side
11.) 2R3Z-6D080-BC Timing cover
12.) 2R3Z-8260-AB Radiator hose
13.) 2R3Z-8A593-AB Radiator hose
14.) 2R3Z-8K576-AA Radiator hose
15.) 2R3Z-8286-AB Water cross over pipe
16.) 2R3Z-6020-AA Timing cover gasket LH side
17.) 2R3Z-6020-BA Timing cover gasket middle
18.) 2R3Z-6020-CA Timing cover gasket RH side
19.) 2R3Z-10A313-AB Upper alternator bracket
20.) 2R3Z-10153-BA Lower alternator bracket
21.) 2R3Z-9A758-AA Cobra throttle cable
22.) 3U2Z-14S411-JUA IAT sensor connector
23.) 2R3Z-9H308A-?? Intercooler pipe to heat Exchanger
24.) 1U2Z-14S411-TA Electrical connector (alt. to harmness )
25.) 2R3Z-6B209-AA Tensioner on timing cover
26.) F8ZZ-6881-AA Cobra oil cooler adapter
Note: Use stock gasket from adapter or a leak will occur
with a Cobra gasket!
27.) 2R3Z-6A642-AA Cobra Oil cooler
28. 2R3Z-9002-AA Cobra fuel tank
29.) 2R3Z-9H307-AB Cobra fuel pump
30.) 2R3Z-6F066-AA Eaton supercharger & inlet / T.B.
31.) 2R3Z-9424-BB Lower intake
32.) 2R3Z-6K775-BA Garrett factory intercooler
33.) 2R3Z-9H486-?? Intercooler to S.C. gasket
34.) 2R3Z-6K683A-?? “……………………………………..”
35.) 2R3Z-6K683B-?? “…………………………………….”
36.) 2R3Z-6K683C-?? “…………………………………….”
37.) 2R3Z-6K683D-?? “…………………………………….”
38.) 2R3Z-6K683E-?? “…………………………………….”
39.) 2R3Z-6K683F-?? “…………………………………….”
40.) 2R3Z-6K683G-?? “…………………………………….”
41.) 2R3Z-8501-AA Ford / Bosche water pump for intercooler
42.) 2R3Z-9L440-?? Factory heat exchanger
43.) 2R3Z-8A193-?? Heat exchanger mounting bracket


and a write up i found

http://www.extremehp.com/modules.php?name=...asc&start=0

Are you planning on doing the swap?

It wouldnt be worth it on a high compression motor, just get a centri blower such as a vortech or procharger from NRP.

Or he could just buy my set up!

which is?

Eaton with a 2.93" pulley......I'm going turbo.

Actually, it would be perfect since I need an intake from a 99 Cobra.

how much do you want? you would need more than just the intake? let me know